Difference between revisions of "Finance Settings"

Latest revision as of 06:03, 11 December 2018

Contents

Finance Settings - Settings / Finance

You can change settings related to finance from here.

Payment Processors

You can add, edit and inactivate payment processors from here.

You can also specify whether you want to Enable/Disable Add Fund, Purchase, Withdraw and Auto Withdraw from here for all processors by clicking on the ON/OFF buttons.

Security Suggestion Regarding Payment Processors API Credentials

This is our high recommendation to keep your sensitive details safe though it is very safe in our system but we are still concerned about our users security threatened as it can be compromised with any other way outside of our system. So we would suggest every users not to store/keep your Payment Processors API details in "Automated Masspay Settings" Whether its a Traditional Masspay or Automatic Payment (We highly recommend not to use Automatic Masspay for your fund safety and security.)

Instruction For ProXCore Version 2.3 and below:

We suggest our users to enter Payment Processors API credentials manually while you need to perform withdraw task and once done then kindly add any dummy details there as we have not provided details deletion option in our script version 2.3 and below.

You can perform this task by following below mentioned path:

Settings--> Finance Settings ---> Payment Processor --> Action --> Edit Details --> Automated Masspay Settings

Instruction For ProXCore Vesrion 2.3 and above:

We have provided "Clear" button in Automated Masspay Settings which will clear all the entered data after withdraw task is completed. Just add Payment processors API credentials manually while you need to perform withdraw task and once done then kindly click on "Clear" button and it will remove all the entered data from that setting.

You can perform this task by following below mentioned path:

Settings--> Finance Settings ---> Payment Processor --> Action --> Edit Details --> Automated Masspay Settings --->Clear

Also refer this screenshot for your reference. Click Here

You are suggested to follow above mentioned steps for all the payment processors.

Adding Payment Processor

To add a payment processor, click on the Add Processor button.

If you want to add a new payment processor in the site and the respective files have been provided to you by the vendor, then fill in following details and submit the form. You are supposed to upload the files to the 'vendors' directory.

- Processor Name :* Specify the name of the processor. The name to be entered here would be provided to you and it will be displayed everywhere in the site.
- Directory Name :* Specify the name of the processor directory that you uploaded to 'vendors' directory. Make sure they match exactly to avoid problems.
- Extra Field : Sometimes, you may need to provide additional fields to the members for some inputs like comment, parameters, etc. Select the checkbox if one or more fields are needed. You would be instructed whether this needs to be done by the vendor of the processor.

Click on Update to add the processor.

After you have added the processor you need to click on Action -> Edit Details to add additional details of the processor. These details are different for every processor.

Bank Wire

Add Fund Settings
- Your Bank Account Details :* Specify the name of the processor. The name to be entered here would be provided to you and it will be displayed everywhere in the site.
  - Beneficiary : Your Company Name
  - Beneficiary account number : xxxxxxxxxxxxxx
  - Beneficiary Address : Your Address
  - Beneficiary Bank : Bank Name
  - Beneficiary Bank Address : Bank Address
  - Beneficiary Bank BIC SWIFT Code : xxxxxxxxx
  - Intermediary Bank : Bank Name
  - Intermediary Bank BIC SWIFT Code : xxxxxxx
  - FEDWIRE ABA No : xxxxxxx
  - CHIPS ABA No : xxxx
  - CHIPS UID No : xxxxxx
  - Favoring Beneficiary Bank : Bank Name
  - bank's account no. with Intermediary Bank : xxxxxxxxxxx
  - Additional Details : The funds should be transferred by remitting bank under MT103 format in USD.
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.

Click on Update to apply the Add Fund Settings.

Automated Masspay Settings
- Fixed Withdrawal Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member requests for a withdrawal using this processor. Set this to 0 (zero) if you do not want to charge them with fixed withdrawal fees amount.
- Variable Withdrawal Fees (%) :* Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on Withdrawal Amount. Set this to 0 (zero) if you do not want to charge them with variable fees amount.

Click on Update to apply the Automated Masspay Settings.

Payza (Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#Payza)

Add Fund Settings
- Routine URL :* Should be 'https://secure.payza.eu/checkout'. This should not be changed unless you want to test with a sandbox account.
- Your Payza Email :* Enter your Payza email id here.
- IPN Security Code :* You can find details for this field from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Payza
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.

Automated Masspay Settings
- Payza Api Password :* You can find details for this field from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Payza
- Fixed Withdrawal Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member requests for a withdrawal using this processor. Set this to 0 (zero) if you do not want to charge them with fixed withdrawal fees amount.
- Variable Withdrawal Fees (%) :* Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on Withdrawal Amount. Set this to 0 (zero) if you do not want to charge them with variable fees amount.

SolidTrusPay (Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#SolidTrustPay )

Add Fund Settings
- Routine URL :* Should Be 'https://solidtrustpay.com/handle.php'
- Your STP Username :* Enter your STP email id here.
- Your Button Name (shopname) : Enter your button name (shopname) here.
- Secondary Password/Button Password : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#SolidTrustPay
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.
- Test Mode : You can enable/disable test mode here. Actual transactions (for Add Fund and Masspay) will not take place when this is enabled.

Automated Masspay Settings
- STP Api Name :* You can find this field from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#SolidTrustPay
- Api Password :* You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#SolidTrustPay
- Fixed Withdrawal Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member requests for a withdrawal using this processor. Set this to 0 (zero) if you do not want to charge them with fixed withdrawal fees amount.
- Variable Withdrawal Fees (%) :* Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on Withdrawal Amount. Set this to 0 (zero) if you do not want to charge them with variable fees amount.

Okpay (Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#Okpay )

Add Fund Settings
- Routine URL :* Should be 'https://www.okpay.com/process.html'
- Wallet ID :* You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Okpay
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.

Automated Masspay Settings
- API Access Password :* You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Okpay
- Fixed Withdrawal Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member requests for a withdrawal using this processor. Set this to 0 (zero) if you do not want to charge them with fixed withdrawal fees amount
- Variable Withdrawal Fees (%) :* Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on Withdrawal Amount. Set this to 0 (zero) if you do not want to charge them with variable fees amount.

Perfect Money (Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#PerfectMoney )

Add Fund Settings
- Routine URL :* Should be 'https://perfectmoney.is/api/step1.asp'
- Payee Account :* Here you need to add your USD account number.
- Alternate Passphrase : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#PerfectMoney
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.

Automated Masspay Settings
- Perfect Money Member Id : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#PerfectMoney
- Account Password : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#PerfectMoney
- Fixed Withdrawal Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member requests for a withdrawal using this processor. Set this to 0 (zero) if you do not want to charge them with fixed withdrawal fees amount.
- Variable Withdrawal Fees (%) :* Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on Withdrawal Amount. Set this to 0 (zero) if you do not want to charge them with variable fees amount.

Payeer (Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#Payeer )

Add Fund Settings
- Routine URL :* Should be 'http://payeer.com/api/merchant/m.php'
- Payeer Account :* Here you need to add your Shop ID.
- Shop Secret Key : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Payeer
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.

Automated Masspay Settings
- Payee Account Number : Here you need to add your Payeer account Id, that starts with letter P.
- Payeer API ID : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Payeer
- Payeer API Secret Key : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Payeer
- Fixed Withdrawal Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member requests for a withdrawal using this processor. Set this to 0 (zero) if you do not want to charge them with fixed withdrawal fees amount.
- Variable Withdrawal Fees (%) :* Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on Withdrawal Amount. Set this to 0 (zero) if you do not want to charge them with variable fees amount.

CoinPayments (Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#CoinPayments )

Add Fund Settings
- Routine URL :* Should be 'https://www.coinpayments.net/index.php'
- Merchant ID :* You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#CoinPayments
- IPN Secret : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#CoinPayments
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.

Automated Masspay Settings
- API Private Key : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#CoinPayments
- API Public Key : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#CoinPayments
- Fixed Withdrawal Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member requests for a withdrawal using this processor. Set this to 0 (zero) if you do not want to charge them with fixed withdrawal fees amount.
- Variable Withdrawal Fees (%) :* Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on Withdrawal Amount. Set this to 0 (zero) if you do not want to charge them with variable fees amount.
- Auto confirm :*
  Set ‘Yes’ if you do not want to receive email confirmation for all API withdrawals.
  Set ‘No’ if you want to receive email confirmation for all API withdrawals.

PayPal (Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#Paypal )

Add Fund Settings
- Routine URL :* Should be 'https://secure.paypal.com/checkout'
- Your PayPal Email :* Enter your PayPal account email Id here.
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.

Automated Masspay Settings
- PayPal Api Name : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Paypal
- APi Password : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Paypal
- APi Password : You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Paypal
- Fixed Withdrawal Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member requests for a withdrawal using this processor. Set this to 0 (zero) if you do not want to charge them with fixed withdrawal fees amount.
- Variable Withdrawal Fees (%) :* Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on Withdrawal Amount. Set this to 0 (zero) if you do not want to charge them with variable fees amount.

2Pay4You(Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#2pay4you )

Add Fund Settings
- Routine URL :* Should be 'https://www.2pay4you.com/api/ipn/'
- Sci Password :* You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#2pay4you
- Public Key : *You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#2pay4you
- Payment Key : *You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#2pay4you
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.
- Test Mode : You can enable/disable test mode here. Actual transactions (for Add Fund) will not take place when this is enabled.

Coinbase(Click Here To Setup For Processor : https://www.proxscripts.com/docs/Payment_Processor#Coinbase )

Add Fund Settings
- Routine URL :* Should be 'https://coinbase.com/checkouts'
- Merchant API Key :* You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Coinbase
- Merchant API Secret : *You can find details of this from the following link :
  https://www.proxscripts.com/docs/Payment_Processor#Coinbase
- Maximum Request Amount Per Day ($) :* Set maximum withdraw request amount for this processor here.
- Fixed Add Fund Fees ($) :* You can specify the Fixed Amount of Fees that would be charged every time a member adds fund to his account using this processor. Set this to 0 (zero) if you do not want to charge them with fixed fees amount.
- Variable Add Fund Fees (%) :* Additionally, you can also charge the add funds with percentage amount. It is calculated based on Add Fund Amount. Set this to 0 (Zero) if you do not want to charge them with variable fees amount.
- Test Mode : You can enable/disable test mode here. Actual transactions (for Add Fund) will not take place when this is enabled.

Inactivating Payment Processor

Click on the Action button and then click on Inactivate Processor.

Add Fund Settings

You can set the Add Fund Settings from here.
- Enable Add Fund Limit : Set Yes if you want to put limitations on the funds members can add to their accounts.
- Minimum Sum Of Add Fund ($) :* Specify the minimum amount that can be added in a member account at the time of add fund.
- Maximum Sum Of Add Fund ($) :* Specify the maximum amount that can be added in a member account at the time of add fund. Enter 0(zero) to disable the limit.
- Life Time Add Fund Limit ($) :* Specify the maximum amount that can be added in a member account. Set this to 0 (zero) if you do not want to put any restrictions on their investments.
- Customised Add Fund Limit :* Enter the limit amount and the number of days here. Days will be counted from the registration date. So, members can only add maximum x amount (specified here) within span of every y days (specified here). After registration set these to 0 (zero) if you do not want to put any restrictions on their investments

Withdrawal Settings

- Free Member Can Request a Withdrawal : Choose whether a free member i.e. a member who has neither paid membership fees nor purchased any position/share or purchased advertisement packages or anything else can request for a withdrawal or not.
- Minimum Sum Of Withdrawal ($) :* Minimum sum of amount a member must withdraw at the time of withdrawal.
- Maximum Sum Of Withdrawal ($) :* Maximum sum of amount a member can withdraw at the time of withdrawal.
- Maximum Requests Allowed Per Day :* Limit the number of withdrawal requests a member can make per day.
- Maximum Request Amount Allowed Per Day ($) :* Limit the amount of withdrawal requests a member can make per day.
- Maximum Request Amount Allowed Per Week ($) :* Limit the amount of withdrawal requests a member can make per week.
- Balance : Choose the Balance(s) which a member can withdraw.
- Withdrawal Days : Select the days on which members can make withdrawal requests.

@@ Line 13: / Line 13: @@
 <div class="subtitle" id="Payment_Processors">Payment Processors</div>
 <p>You can add, edit and inactivate payment processors from here.<br/ ><br />You can also specify whether you want to Enable/Disable Add Fund, Purchase, Withdraw and Auto Withdraw from here for all processors by clicking on the <b>ON/OFF</b> buttons. </p>
+<div class="important">
+<div class="subtitle" style="font-size:18px;padding-top:15px;padding-bottom:15px;">Security Suggestion Regarding Payment Processors API Credentials</div>
+<p>
+This is our high recommendation to keep your sensitive details safe though it is very safe in our system but we are still concerned about our users security threatened as it can be compromised with any other way outside of our system. So we would suggest every users not to store/keep your Payment Processors API details in "Automated Masspay Settings" Whether its a Traditional Masspay or Automatic Payment (We highly recommend not to use Automatic Masspay for your fund safety and security.)</p>
+<b>Instruction For ProXCore Version 2.3 and below:</b>
+<p>We suggest our users to enter Payment Processors API credentials manually while you need to perform withdraw task and once done then kindly add any dummy details there as we have not provided details deletion option in our script version 2.3 and below.</p>
+<p>You can perform this task by following below mentioned path:</p>
+<p><b>Settings--> Finance Settings ---> Payment Processor  --> Action --> Edit Details --> Automated Masspay Settings</b></p>
+<b>Instruction For ProXCore Vesrion 2.3 and above:</b>
+<p>We have provided <b>"Clear"</b> button in Automated Masspay Settings which will clear all the entered data after withdraw task is completed. Just add Payment processors API credentials manually while you need to perform withdraw task and once done then kindly click on <b>"Clear"</b> button and it will remove all the entered data from that setting. </p>
+<p>You can perform this task by following below mentioned path:</p>
+<p><b>Settings--> Finance Settings ---> Payment Processor  --> Action --> Edit Details --> Automated Masspay Settings --->Clear</b></p>
+<p>Also refer this screenshot for your reference. <b><xa href="https://www.proxscripts.com/docs/images/clear.png" target="_blank">Click Here</xa></b></p>
+<p>You are suggested to follow above mentioned steps for all the payment processors.</p>
+</div>
 <div class="docs">
    <ul>
@@ Line 32: / Line 50: @@
 <p>Click on <b>Update</b> to add the processor.</p>
 <p>After you have added the processor you need to click on <b>Action -> Edit Details</b> to add additional details of the processor. These details are different for every processor.</p>
 <div class="docs">
@@ Line 85: / Line 101: @@
      <li style="list-style: none;">Add Fund Settings <br/><br/>
        <ul>
-	<li><b>Routine URL :* </b>Should be <b>'https://secure.payza.com/checkout'</b>. This should not be changed unless you want to test with a sandbox account.</li>
+	<li><b>Routine URL :* </b>Should be <b>'https://secure.payza.eu/checkout'</b>. This should not be changed unless you want to test with a sandbox account.</li>
 	<li><b>Your Payza Email :* </b>Enter your Payza email id here.</li>
 	<li><span style="color: red;"><b>IPN Security Code :* </b>You can find details for this field from the following link : </span><br />https://www.proxscripts.com/docs/Payment_Processor#Payza</li>
@@ Line 157: / Line 173: @@
      </li>
    </ul>
-</div>
+</div><!--
 <div class="docs">
    <ul><br />
@@ Line 183: / Line 199: @@
      </li>
    </ul>
-</div>
+</div>-->
 <div class="docs">
    <ul><br />
      <li>Perfect Money   (Click Here To Setup For Processor :  <xa href="https://www.proxscripts.com/docs/Payment_Processor#PerfectMoney" target="_blank"> https://www.proxscripts.com/docs/Payment_Processor#PerfectMoney </xa>  )<br /><br />Add Fund Settings<br /><br />
        <ul>
-	<li><b>Routine URL :* </b>Should be 'https://www.okpay.com/process.html'</li>
+	<li><b>Routine URL :* </b>Should be 'https://perfectmoney.is/api/step1.asp'</li>
-	<li><span style="color: red;"><b>Payee Account :* </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#PerfectMoney</li>
+	<li><span style="color: red;"><b>Payee Account :* </b></span>Here you need to add your USD account number.</li>
 	<li><span style="color: red;"><b>Alternate Passphrase : </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#PerfectMoney</li>
 	<li><b>Maximum Request Amount Per Day ($) :* </b>Set maximum withdraw request amount for this processor here.</li>
@@ Line 206: / Line 222: @@
 	<li><b>Fixed Withdrawal Fees ($) :* </b>You can specify the <b>Fixed Amount of Fees</b> that would be charged every time a member requests for a withdrawal using this processor. Set this to <b>0 (zero)</b> if you do not want to charge them with fixed withdrawal fees amount.</li>
 	<li><b>Variable Withdrawal Fees (%) :* </b>Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on <b>Withdrawal Amount</b>. Set this to <b>0 (zero)</b> if you do not want to charge them with variable fees amount.</li>
-      </ul>
-    </li>
-  </ul>
-</div>
-<div class="docs">
-  <ul><br />
-    <li>Pexpay   (Click Here To Setup For Processor :  <xa href="https://www.proxscripts.com/docs/Payment_Processor#Pexpay" target="_blank" >https://www.proxscripts.com/docs/Payment_Processor#Pexpay</xa>  )<br /><br />Add Fund Settings<br /><br />
-      <ul>
-	<li><b>Routine URL :* </b>Should be 'https://www.pexpay.com/payments/autopay.php'</li>
-	<li><span style="color: red;"><b>Payee Account :* </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Pexpay</li>
-	<li><span style="color: red;"><b>Security Guard PIN : </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Pexpay</li>
-	<li><b>Maximum Request Amount Per Day ($) :* </b>Set maximum withdraw request amount for this processor here.</li>
-	<li><b>Fixed Add Fund Fees ($) :* </b>You can specify the <b>Fixed Amount of Fees </b>that would be charged every time a member adds fund to his account using this processor. Set this to <b>0 (zero) </b>if you do not want to charge them with fixed fees amount.</li>
-	<li><b>Variable Add Fund Fees (%) :* </b>Additionally, you can also charge the add funds with percentage amount. It is calculated based on <b>Add Fund Amount</b>. Set this to <b>0 (Zero)</b> if you do not want to charge them with variable fees amount.</li>
-      </ul>
-    </li>
-  </ul>
-</div>
-<div class="docs">
-  <ul>
-    <li style="list-style: none;">Automated Masspay Settings<br /><br />
-      <ul>
-	<li><span style="color: red;"><b>Pexpay Email : </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Pexpay</li>
-	<li><span style="color: red;"><b>Pexpay Password : </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Pexpay</li>
-	<li><b>Fixed Withdrawal Fees ($) :* </b>You can specify the <b>Fixed Amount of Fees</b> that would be charged every time a member requests for a withdrawal using this processor. Set this to <b>0 (zero)</b> if you do not want to charge them with fixed withdrawal fees amount.</li>
-	<li><b>Variable Withdrawal Fees (%) :* </b>Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on <b>Withdrawal Amount</b>. Set this to <b>0 (zero) </b>if you do not want to charge them with variable fees amount.</li>
        </ul>
      </li>
@@ Line 241: / Line 231: @@
        <ul>
 	<li><b>Routine URL :* </b>Should be 'http://payeer.com/api/merchant/m.php'</li>
-	<li><span style="color: red;"><b>Payeer Account :* </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Payeer</li>
+	<li><span style="color: red;"><b>Payeer Account :* </b></span>Here you need to add your Shop ID.</li>
 	<li><span style="color: red;"><b>Shop Secret Key : </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Payeer</li>
 	<li><b>Maximum Request Amount Per Day ($) :* </b>Set maximum withdraw request amount for this processor here.</li>
@@ Line 254: / Line 244: @@
      <li style="list-style: none;">Automated Masspay Settings<br /><br />
        <ul>
-	<li><span style="color: red;"><b>Payee Account Number : </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Payeer</li>
+	<li><span style="color: red;"><b>Payee Account Number : </b></span>Here you need to add your Payeer account Id, that starts with letter P.</li>
 	<li><span style="color: red;"><b>Payeer API ID : </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Payeer</li>
 	<li><span style="color: red;"><b>Payeer API Secret Key : </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Payeer</li>
@@ Line 285: / Line 275: @@
 	<li><b>Fixed Withdrawal Fees ($) :* </b>You can specify the <b>Fixed Amount of Fees</b> that would be charged every time a member requests for a withdrawal using this processor. Set this to <b>0 (zero) </b>if you do not want to charge them with fixed withdrawal fees amount.</li>
 	<li><b>Variable Withdrawal Fees (%) :* </b>Additionally, you can also charge the withdrawal requests with percentage amount. It is calculated based on <b>Withdrawal Amount</b>. Set this to <b>0 (zero) </b>if you do not want to charge them with variable fees amount.</li>
+  <li><b>Auto confirm :* </b> <br/>Set <b>‘Yes’</b> if you do not want to receive email confirmation for all API withdrawals.<br/>Set <b>‘No’</b> if you want to receive email confirmation for all API withdrawals.</li>
        </ul>
      </li>
@@ Line 315: / Line 306: @@
    </ul>
 </div>
-<p><b>Inactivating Payment Processor </b></p>
-<p>Click on the <b>Action</b> button and then click on <b>Inactivate Processor</b>.</p>
 <div class="docs">
-   <ul><li>2payforyou</li></ul>
+   <ul><li>2Pay4You(Click Here To Setup For Processor :  <xa href="https://www.proxscripts.com/docs/Payment_Processor#2pay4you" target="_blank" >https://www.proxscripts.com/docs/Payment_Processor#2pay4you</xa>  )<br /><br />Add Fund Settings<br /><br />
+<ul><li><b>Routine URL :* </b>Should be 'https://www.2pay4you.com/api/ipn/'</li>
-<p> A new payment processor has been integrated into the script i.e. 2payforyou.</p>
+	<li><span style="color: red;"><b>Sci Password :* </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#2pay4you</li>
+<li><span style="color: red;"><b>Public Key : *</b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#2pay4you</li>
+	<li><span style="color: red;"><b>Payment Key : *</b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#2pay4you</li>
+	<li><b>Maximum Request Amount Per Day ($) :* </b>Set maximum withdraw request amount for this processor here.</li>
+	<li><b>Fixed Add Fund Fees ($) :* </b>You can specify the <b>Fixed Amount of Fees</b> that would be charged every time a member adds fund to his account using this processor. Set this to <b>0 (zero)</b> if you do not want to charge them with fixed fees amount.</li>
+	<li><b>Variable Add Fund Fees (%) :* </b>Additionally, you can also charge the add funds with percentage amount. It is calculated based on <b>Add Fund Amount</b>. Set this to <b>0 (Zero)</b> if you do not want to charge them with variable fees amount.</li>
+<li><b>Test Mode : </b>You can enable/disable test mode here. Actual transactions (for Add Fund) will not take place when this is enabled.</li>
+</ul>
+</li>
+</ul>
+</div>
+<div class="docs">
+  <ul><li>Coinbase(Click Here To Setup For Processor :  <xa href="https://www.proxscripts.com/docs/Payment_Processor#Coinbase" target="_blank" >https://www.proxscripts.com/docs/Payment_Processor#Coinbase</xa>  )<br /><br />Add Fund Settings<br /><br />
+<ul><li><b>Routine URL :* </b>Should be 'https://coinbase.com/checkouts'</li>
+	<li><span style="color: red;"><b>Merchant API Key :* </b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Coinbase</li>
+<li><span style="color: red;"><b>Merchant API Secret : *</b></span>You can find details of this from the following link : <br />https://www.proxscripts.com/docs/Payment_Processor#Coinbase</li>
+	<li><b>Maximum Request Amount Per Day ($) :* </b>Set maximum withdraw request amount for this processor here.</li>
+	<li><b>Fixed Add Fund Fees ($) :* </b>You can specify the <b>Fixed Amount of Fees</b> that would be charged every time a member adds fund to his account using this processor. Set this to <b>0 (zero)</b> if you do not want to charge them with fixed fees amount.</li>
+	<li><b>Variable Add Fund Fees (%) :* </b>Additionally, you can also charge the add funds with percentage amount. It is calculated based on <b>Add Fund Amount</b>. Set this to <b>0 (Zero)</b> if you do not want to charge them with variable fees amount.</li>
+<li><b>Test Mode : </b>You can enable/disable test mode here. Actual transactions (for Add Fund) will not take place when this is enabled.</li>
+</ul>
+</li>
+</ul>
 </div>
+<br/>
+<p><b>Inactivating Payment Processor </b></p>
+<p>Click on the <b>Action</b> button and then click on <b>Inactivate Processor</b>.</p>
 <div class="subtitle" id="Add_Fund_Settings">Add Fund Settings</div>
 <div class="docs">